Standard Dimensions: 120x75x220(h) cm, 150x75x220(h) cm, 180x75x220(h) cm

A fume hood is typically a large piece of equipment that ensures a safety place which includes a ventilation system for users making their laboratory works, experiments and analyzes with chemicals.

FC-SP series fume hoods have vertical flat type control panels on both sides. These flat panels has buttons and valves on it.

Fume Hood Body: Made from 1,2mm galvanised steel and coated with epoxy based electrostatic powder. So the body is resistand to corrosion.

Fume Hood Worktops: Can be various depending on your needs. Worktops used with this fume hood are listed below;

Chemical Resistant Compact Laminate

This worktop is one of the most preferred product. It is the best seller item and got a high price?performance ratio. Has a good chemical resistance. Highly resistant to heat, scratching and impacts. But it can be stained in long terms
If you do not care about cleanliness. There is no disadvantage to use with tains, but aesthetically it is possible to avoid from stainig by chosing black coloured panels.

Stoneware

Stoneware is a type of industrial ceramic that is produced in one piece without joints. Stoneware has a very high resistance against all known cehemicals except hydrogen fluoride and its' solutions. Also it is extremely resistant to wet, heat and scratches. Impact resistance is not satisfying. Stoneware is not preferred too much because of the cost and the long delivery times. Thicknesses of 10-22-26mm are applied as barrier or barrier free. For drawer furnaces, cupsink (drip cup) from its own material can be produced together with the sink.

Polypropylene

It is made of polypropylene plastic plate. It can be applied with a thickness of 8 to 10 mm and a skirting board. Acid and base resistance is very high. Impact resistance is very good. The price is more suitable than the ceramic alternative and it has low scratching and heat resistance.